LS343 UPLIGHT LUMINAIRE


	LS343 UPLIGHT LUMINAIRE		IP68

	Polished stainless steel recessed cover
	Polished stainless steel round flush cover
	Polished stainless steel square flush cover
	Polished stainless steel pre-installation cover

Source

PureOptics™ (advanced glass reflector offers 99% efficient reflectivity), or aluminium reflector

- MH / HIT (35W, 70W)

- 35 and 70W available with electronic gear/ballast
- 150W MH / HIT not available in Australia

- CFL / TC-T (18W, 26W)

- CFL / TC-TEL (18W, 26W)

- Electronic ballast

- HPS / HSE (50W, 70W, 100W)

MH PAR30 (70W max)

35W and 70W available with electronic gear / ballast

INC PAR30 (100W max) / PAR20

Halospot AR111 (100W max)

CDM-R111 35W

Features

Many optical configurations available

Ingress protection rating - IP68

OptiClear™ max static load - 4200kg
Applied to a 50mm diameter area in the centre of the glass

Corrosion resistant 316 stainless steel -
marine grade

Adjustable gimbal

Modular design for easy installation and maintenance

Non-galling clinch nuts dramatically reduce
cross threading or binding

Moisture control device to reduce misting
on glass

Self resetting thermal protection device to
protect unit from overheating

Corrosion resistant stainless steel cover fasteners

Options

Electronic gear / ballast for high efficiency
and longer lamp life (35W, 70W)

HumanTouch™ total temperature
reduction technology

OptiClear™ lens for increased efficiency
High optical transmission, toughened

GripGlass™ slip resistant safety glass

Recessed, round flush and square flush covers

Installation

- Direct burial

- Mounting collar (decks and grates)

- Pre-installation
- (concrete blockout and drive-over)

Accessories

LS636	Brass grill
LS6013	Slatted louvre
LS688	Wallwash lens
LS6012	Cross hatch louvre
LS691	Prismatic lens
LS686	Dichroic colour filter
LS685	Linear spreader lens
LS693	HumanTouch™ Filter
LS6014	Cylindrical louvre
LS6011	Cross hatch louvre
LS690	Prismatic lens
LS6018	Lenticuled lens
LS689	Dichroic colour filter
LS692	HumanTouch™ Filter
LS625	Cross hatch louvre
LS626	Slatted louvre
LS668	Dichroic colour filter
LS653	HumanTouch™ Filter
LS649	HumanTouch™ Filter
	Click here for accessories diagram

Installation: Direct Burial

Recessed Cover

For concrete or similar surface, where no lid overhang is desired.

Brass: Polished

Stainless steel 316: Polished

Stainless steel 316: Brushed

(Note: Not suitable for drive over)

Flush cover Plate

For surfaces where the lid has to cover a gap between fitting and surround.

Brass: Polished

Stainless steel 316: Polished

Stainless steel 316: Brushed

(Note: Not suitable for drive over)

Installation: Pre-Installation Kits

Pre-Installation - Decks & Grates

(Add LS640 accessory to the specification for this configuration.)
For hollow floors

Brass: Polished

Brass: Brushed

Stainless steel 316: Polished

Stainless steel 316: Brushed

Pre-Installation - Concrete (Block Out)

(Add LS640-K accessory to the specification for this configuration.)
For drive over. For installation in to concrete or similar surface and for when it may be preferable to install mounting location and cable before installing lamp fixture.

Brass: Polished

Brass: Brushed

Stainless steel 316: Polished

Stainless steel 316: Brushed