LS363 UPLIGHT LUMINAIRE
IP68
  
         
Polished stainless steel
recessed cover
Polished stainless steel
round flush cover
Polished stainless steel
square flush cover
Polished stainless steel
pre-installation cover
 
 

 
Source
MH CDM-TM (20W)
12V, MR16 (50W IRC max)
Lumen output equivalent to standard 60W MR16
CFL / TC-T (18W, 26W)
INC PAR30 (100W max)
INC PAR38 (100W max)
 
Features
Integral or remote transformer or gear / ballast
Ingress protection rating - IP68
OptiClear™ max static load - 1800kg
Applied to a 50mm diameter area in the centre of the glass
Corrosion resistant 316 stainless steel -
marine grade
Adjustable gimbal (MR16 and MH configuration only)
Modular design for easy installation and
maintenance
Non-galling clinch nuts dramatically reduce
cross threading or binding
Moisture control device to reduce misting
on glass
Self resetting thermal protection device to
protect unit from overheating
Corrosion resistant stainless steel cover
fasteners
Internal honeycomb louvre
MR16 configuration only
Options
HumanTouch™ total temperature reduction technology
OptiClear™ lens for increased efficiency
High optical transmission, toughened
GripGlass™ slip resistant safety glass
Recessed, round flush and square flush
covers
 
Installation
- Direct burial
- Mounting collar (decks and grates)
- Pre-installation
- (concrete blockout and drive-over)
 


Accessories
LS645 Brass grill
LS664 HumanTouch™ Filter
LS6016 HumanTouch™ Filter
LS646 Cross hatch louvre
LS667 Frosted filter
LLLS Linear spreader lens
LS643 Dichroic colour filter
LS633 Colour filter
LS694 Dichroic colour filter
LS677 CFL glare shield
 
Click here for accessories diagram


 

Installation: Direct Burial
 
Recessed Cover
For concrete or similar surface, where no lid overhang is desired.
Brass: Polished
Stainless steel 316: Polished
Stainless steel 316: Brushed
(Note: Not suitable for drive over)
 
Flush Cover Plate
For surfaces where the lid has to cover a gap between fitting and surround.
Brass: Polished
Stainless steel 316: Polished
Stainless steel 316: Brushed
(Note: Not suitable for drive over)
 
 
 
 

Installation: Pre-Installation Kits
 
Pre-Installation - Decks & Grates
(Add LS644 accessory to the specification for this configuration.)
For hollow floors.
Brass: Polished
Brass: Brushed
Stainless steel 316: Polished
Stainless steel 316: Brushed
 
Pre-Installation - Concrete (Block Out)
(Add LS644-K accessory to the specification for this configuration.)
For drive over. For installation in to concrete or similar surface and for when it may be preferable to install mounting location and cable before installing lamp fixture.
Brass: Polished
Brass: Brushed
Stainless steel 316: Polished
Stainless steel 316: Brushed
 
 
 
 

Adjustable Gimbal

   Fixed Lamp

MR16
Adjustable Gimbal

20W MH CDM-TM
Adjustable Gimbal

Compact Fluorescent

INC PAR38


 

Literature available

DXF files available


Contact Lumascape
Copyright 2006 Lumascape Lighting Industries Pty Ltd
Return to www.lumascape.com.au home