12V AC (Magnetic
trans. only)
24V DC (Ripple free supply)
NOTE:
Low voltage requires remote driver
/ transformer.
Optional remote constant current driver.
Order separately.
Beam Angles
Narrow beam 8°
Medium beam 28°
Flood beam 46°
Adjustability
-5° to 15°
LED Colours
For RGB option contact factory
White (5300K typ.)
Warm white (3300K typ.)
Blue Availability of
other colours on request.
Minimum order quantities may apply.
IP Rating
IP68
Housing Material / Finish
316 stainless steel
Cover Material / Finish
Recessed, Round Flush
or Square Flush
316 stainless steel:
- Polished
- Brushed
Brass:
- Polished
- Brushed
Lens / Options
OptiClear™ GripGlass™
Toughened borosilicate
Mounting Options
Direct burial
LS647 Mounting
collar Order
separately.
LS647-K Low voltage pre-installation
concrete blockout Order separately.
LS647-K-MV Mains voltage pre-installation
concrete blockout Order separately.
Cable Length
3m standard Other
lengths available on request.
Drive-over Option
LS647-K / LS647-K-MV Pre-installation
concrete blockout with OptiClear™
lens or
GripGlass™ lens Order LS647-K / LS647-K-MV separately.
Static Load Rating
3750kg when using OptiClear™
lens
Impact Rating
IK9 when using OptiClear™
lens
Ambient Temp. Rating
-20°C to 50°C
Warranty
10 year structural
12 month electrical
Optical Accessories
Integral glare control fitted as
standard LLLS Linear spreader lens option
Photometrics
Refer to www.lumascape.com
Installation:
Direct Burial
Recessed
Cover
For
concrete or similar surface, where no lid overhang
is desired.
Brass: Polished
Stainless steel 316: Polished
Stainless steel 316: Brushed
(Note:
Not suitable for drive over)
Flush
Cover Plate
For
surfaces where the lid has to cover a gap between
fitting and surround.
Brass: Polished
Stainless steel 316: Polished
Stainless steel 316: Brushed
(Note:
Not suitable for drive over)
Installation:
Pre-Installation Kits
Pre-Installation
- Decks & Grates
(Add
LS647 accessory to the specification
for this configuration.)
For hollow floors.
Brass: Polished
Brass: Brushed
Stainless steel 316: Polished
Stainless steel 316: Brushed
Pre-Installation
- Concrete (Block Out)
(Add
LS647-K or
LS647-K-MV accessory to the specification
for this configuration.)
For drive over. For installation in to concrete or
similar surface and for when it may be preferable
to install mounting location and cable before installing
lamp fixture.
For RGB option contact factory
White (5300K typ.)
Warm white (3300K typ.)
Blue
Brass: Polished
Stainless steel 316: Polished
Stainless steel 316: Brushed
Brass: Brushed