LS843 UPLIGHT LUMINAIRE
IP68
  
         
Polished stainless steel
recessed cover
Polished stainless steel
round flush cover
Polished stainless steel
square flush cover
Polished stainless steel
pre-installation cover
 
 

 
Source
Aluminium reflector
MH CDM-TM (20W)
 
Features
HumanTouch™ total temperature reduction technology as standard
Shallow depth
Highly efficient 20W MH
Electronic ballast for high efficiency and
longer lamp life
Ingress protection rating - IP68
OptiClear™ max static load - 4200kg
Applied to a 50mm diameter area in the centre of the glass
Corrosion resistant 316 stainless steel -
marine grade
Non-galling clinch nuts dramatically reduce
cross threading or binding
Moisture control device to reduce misting
on glass
Self resetting thermal protection device to
protect unit from over heating
Corrosion resistant stainless steel cover
fasteners
Options
OptiClear™ lens for increased efficiency
High optical transmission, toughened
GripGlass™ slip resistant safety glass
Recessed, round flush and square flush covers
 
Installation
- Direct burial
- Mounting collar (decks and grates)
- Pre-installation
- (concrete blockout and drive-over)
 

Accessories
LS636 Brass grill
LS6013 Slatted louvre
S6012 Cross hatch louvre
LS699 Wallwash lens
LS691 Prismatic lens
LS686 Dichroic colour filter
LS685 Linear spreader lens
 
Click here for accessories diagram


 

Installation: Direct Burial
 
Recessed Cover
For concrete or similar surface, where no lid overhang is desired.
Brass: Polished
Stainless steel 316: Polished
Stainless steel 316: Brushed
(Note: Not suitable for drive over)
 
Flush Cover Plate
For surfaces where the lid has to cover a gap between fitting and surround.
Brass: Polished
Stainless steel 316: Polished
Stainless steel 316: Brushed
(Note: Not suitable for drive over)
 
 
 
 

Installation: Pre-Installation Kits
 
Pre-Installation - Decks & Grates
(Add LS640 accessory to the specification for this configuration.)
For hollow floors.
Brass: Polished
Brass: Brushed
Stainless steel 316: Polished
Stainless steel 316: Brushed
 
Pre-Installation - Concrete (Block Out)
(Add LS6052-K accessory to the specification for this configuration.)
For drive over. For installation in to concrete or similar surface and for when it may be preferable to install mounting location and cable before installing lamp fixture.
Brass: Polished
Brass: Brushed
Stainless steel 316: Polished
Stainless steel 316: Brushed
 
 
 
 

Fixed Aluminium

    

MH CDM-TM
Flood aluminum reflector

 

 


 

Literature available

DXF files available


Contact Lumascape
Copyright 2006 Lumascape Lighting Industries Pty Ltd
Return to www.lumascape.com.au home