110-240V AC, 50/60 Hz Line
voltage for single colour only
Low voltage:
12V AC (Magnetic
trans. only)
24V DC (Ripple free supply)
NOTE:
Low voltage requires remote transformer.
Optional remote constant current driver - single
colour only. Order separately.
Beam Angles
Narrow beam 10° Not available for RGB
Medium beam 28°
Adjustability
±20°
LED Colours
RGB
White (5300K typ.)
Warm white (3300K typ.)
Blue Availability of other colours
on request.
Minimum order quantities may apply.
Control Signal
DMX compatible - RGB only
IP Rating
IP68
Housing Material / Finish
316 stainless steel
Cover Material / Finish
Recessed, Round Flush
or Square Flush
316 stainless steel:
- Polished
- Brushed
Brass:
- Polished
- Brushed
Lens / Options
OptiClear™ GripGlass™
Toughened borosilicate
Mounting Options
Direct burial
LS640 Mounting
collar Order separately.
LS6072 Pre-installation
concrete blockout Order separately.
Cable Length
3m standard Other lengths available on
request.
Drive-over Option
LS6072 Pre-installation
concrete blockout with OptiClear™
lens or GripGlass™ lens Order LS6072 separately.
Static Load Rating
4200kg when using OptiClear™
lens
Impact Rating
IK9 when using OptiClear™
lens
Ambient Temp. Rating
-20°C to 50°C
Warranty
10 year structural
12 month electrical
Optical Accessories
LS688 Wallwash
lens
Other Accessories
LS636 Brass grill
Installation:
Direct Burial
Recessed
Cover
For
concrete or similar surface, where no lid overhang
is desired.
Brass: Polished
Stainless steel 316: Polished
Stainless steel 316: Brushed
(Note:
Not suitable for drive over)
Flush
Cover Plate
For
surfaces where the lid has to cover a gap between
fitting and surround.
Brass: Polished
Stainless steel 316: Polished
Stainless steel 316: Brushed
(Note:
Not suitable for drive over)
Installation:
Pre-Installation Kits
Pre-Installation
- Decks & Grates
(Add
LS640 accessory to the specification
for this configuration.)
For hollow floors.
Brass: Polished
Brass: Brushed
Stainless steel 316: Polished
Stainless steel 316: Brushed
Pre-Installation
- Concrete (Block Out)
(Add
LS6058-K accessory to the specification
for this configuration.)
For drive over. For installation in to concrete or
similar surface and for when it may be preferable
to install mounting location and cable before installing
lamp fixture.
RGB
White (5300K typ.)
Warm white (3300K typ.)
Blue
Brass: Polished
Stainless steel 316: Polished
Stainless steel 316: Brushed
Brass: Brushed