Vedita LED VE5 - LS9405LED

A versatile, low-voltage underwater luminaire with installation niche

Product Overview

The Underwater LS9405LED Vedita is specifically engineered for underwater use in fountains, water features and is suitable for saline waters. When high output is required, it can be deployed in its full output, 2W configuration; if a dot of light is required, it can be set as low as 0.2W (either by the factory or in the field). Alternatively, the luminaire can be dynamically dimmed via Lumascape d5 driver technology.  This luminaire comes with a pre-installation blockout niche.  Constructed in part from 316 marine grade stainless steel, this luminaire also comes standard with Lumascape proprietary ElectroPolishPlus™ surface treatment.

Features

Lumen Output 180lm Power Consumption 2.8W Typical Lifetime (TM21 Reported) > 60,000 hours @ 35°C Water Temperature (B10, L90, TM21 Reported) Typical Lifetime (TM21 Projected) 69,667 hours @ 35°C Water Temp (B10, L90, TM21 Projected) Control Protocol PWM (0-10V, DMX) IP Rating IP68 to 2m (6ft) IK Rating IK10 Compliance ETL - USA & Canada CE Color Options Warm White Cool White Blue (470 nm) Data Sheet

Specifications

Product Configurator

Customise Vedita LED VE5 below

Light Engine

Required

1 W (1)

2 W (2)

Light Source

Required

Static White (D7)

Static White (D7)

2,700 K (80 CRI, 3 SDCM)

Static White (H6)

Static White (H6)

3,000 K (80 CRI, 3 SDCM)

Static White (W4)

Static White (W4)

4,000 K (80 CRI, 3 SDCM)

Single Color (B4)

Single Color (B4)

Blue (470 nm)

Finish

Required

316 Stainless Steel (SS)

316 Stainless Steel (SS)

Machined finished with ElectroPolishPlus™ surface treatment

Beam Angles

Published angles may vary slightly to photometric data. Please refer to IES files where relevant.

Required

Narrow (NR)

Narrow (NR)

14°

Medium (ME)

Medium (ME)

20°

Wide (WD)

Wide (WD)

30°

Linear (LN)

Linear (LN)

10° x 40°

Marker (FL)

Marker (FL)

Diffused lens

Input Voltage

Required

24 Vdc Dimmable (27)

24 Vdc Dimmable (27)

PWM Dimmable Driver

Tilt

Required

Standard (U)

Vertical, 0° tilt

Wall Wash (W)

Not applicable with Flood (FL) beam

Cable Length

Required

8 m (08)

4 x 0.5 mm² H05RN-F flexible rubber cable

15 m (15)

4 x 0.5mm² H05RN-F flexible rubber cable

20 m (20)

4 x 0.5 mm² H05RN-F flexible rubber cable

25 m (25)

4 x 0.5 mm² H05RN-F flexible rubber cable